• If you have a question about commercial production or the hot sauce business, please post in The Food Biz.

bottling Hot fill questions?

Hi guys,
 
I am trying to perfect my hot fill process so I can get my sauce out of the homemade side. With the Glass containers i need the numbers for temp, head space and vacuum. I have temp of 205 for fill and head space of 1/4 in, but I would like to know with a glass container how do you calculate for vacuum? I cannot find an equation or a device that is used for glass to get vacuum. (edited for clarification)
 
salsalady said:
What jubnut said is correct.  Check out the Making Hot Sauce 101 thread, that should answer most of your questions.
 
Good Luck!
SL
 
salsalady,
 
Please clarify this for my own curiosity....is "hot filling" part of the hot water bath canning process, or a distinct process in itself?  While it has been some time since I was schooled in canning, and I'm aware some schools of thought on the subject have changed, I'd always been taught that hot filling, in itself, doesn't really create a shelf-stable product.  Thanks!
 
The Hot Fill Hold method (HFH) is different from boiling water bath  (BWB) which is different than pressure canning.
 
BWB is using traditional canning jars with metal lids and rings.  The jars are filled with hot or cold product.  The jars are immersed in boiling water for the prescribed time and then removed from the boiling water and allowed to cool.
 
HFH is used for glass bottles with PLASTIC caps.  The plastic caps cannot be immersed in water.  In the HFH process, a sauce with the proper pH is heated to the proper temp (usually 200F).  The heated sauce is put into the glass bottle which is immediately capped and inverted.   The bottles are kept inverted for about 5 minutes which allows the heated sauce to come in contact with the inside of the cap.
 
Pressure canning is a whole other process that is not commonly used by sauce makers.
 
This is explained in pretty good detail in the Hot Sauce 101 thread.
 
Hope this helps~
SL
 
The key words in HFH would be "proper pH".   If the pH of your product is too high you will be risking exposure to botulinum toxin. 
 
HI Salsa Lady, 
 
Should the plastic caps have any kind of liner inside when doing the HFH process? I see a lot of options from suppliers from plastic to foil liners on the inside. 
 
I used to be able to get unlined caps, but now they only offer lined caps. I'd have to look up the listing for the exact type.


Brb...
 
Specialty Bottles specs aren't showing up on my phone.

From experience, I have had very very few bottles not seal when using a cap with a liner. I don't think you would want to use a foil liner. Most are plastic (plastisol???? Don't quote me on that).
 
salsalady said:
Dude, I said not to quote me on that!!!
Some people just can't follow directions.
:Rolleyes:

:lol:
IMG_7523.GIF
 
Back
Top