On one of the next few days I'll be transplanting my plants to their final pots (~5gal). It seems that I'm lacking some perlite, but the only store that's near me doesn't carry it. They have something called ceramsite, which I'm assuming is the same thing as LECA/hydroton. I was thinking of mixing this into the medium, alongside perlite (and some vermiculite), to make up for the lack of it. Is this a viable solution? How does it compare to perlite, in terms of quality and effectiveness? Thanks.
-
If you need help identifying a pepper, disease, or plant issue, please post in Identification.
Expanded clay in medium?
- Thread starter bongcloud
- Start date
Although it is not the same or close to the same. it would work as an aggregate. It also has water retention properties as it is designed as a total plant media, which may or may not be of benefit depending on your climate and growing conditions.
It may be better than nothing. It really all depends on the condition and make up of your existing media.
It may be better than nothing. It really all depends on the condition and make up of your existing media.
I've got a 50 lb bag of hydroton. I have about 200 lbs of perlite in my shed. Why didn't I use the hydroton, instead of buying all that perlite, you might ask?
.
Expanded clay does the job of moisture retention and aeration, but it does it in a very different way than perlite. The round shape creates large, semi-uniform air spaces, when used in hydroponics. And the texture/structure of the clay helps absorb and hold moisture, longer. Clay does this without being "soggy" wet. However, the aeration/moisture retention combo really only works in the hydro setup. Once you put anything else in it, it instantly loses the aeration property. (because it's holding water) Oh, and it should be obvious that the big spaces also are drainage. You obviously won't have that with other material occupying the air spaces. Additionally, there is a good chance that by holding extra moisture, you may be actually creating a higher perched water table in the mix, with the expanded clay.
.
Short answer... Probably not the best substitute for perlite. Might be a great thing to use in limited quantity, and in layers, for moisture retention.
.
Side note... if you want to do something fun... you could always try some pine bark. Say 60%. Add about 10-20% peat, and the rest expanded clay. That might be an interesting mix. I have rocotos growing right now, in 12" of straight pine bark, sitting on top of my native sand. And they look great. Never been able to grow them successfully here before.
.
Expanded clay does the job of moisture retention and aeration, but it does it in a very different way than perlite. The round shape creates large, semi-uniform air spaces, when used in hydroponics. And the texture/structure of the clay helps absorb and hold moisture, longer. Clay does this without being "soggy" wet. However, the aeration/moisture retention combo really only works in the hydro setup. Once you put anything else in it, it instantly loses the aeration property. (because it's holding water) Oh, and it should be obvious that the big spaces also are drainage. You obviously won't have that with other material occupying the air spaces. Additionally, there is a good chance that by holding extra moisture, you may be actually creating a higher perched water table in the mix, with the expanded clay.
.
Short answer... Probably not the best substitute for perlite. Might be a great thing to use in limited quantity, and in layers, for moisture retention.
.
Side note... if you want to do something fun... you could always try some pine bark. Say 60%. Add about 10-20% peat, and the rest expanded clay. That might be an interesting mix. I have rocotos growing right now, in 12" of straight pine bark, sitting on top of my native sand. And they look great. Never been able to grow them successfully here before.