• Do you need help identifying a 🌶?
    Is your plant suffering from an unknown issue? 🤧
    Then ask in Identification and Diagnosis.

container Drilling drain holes in a small bucket (or plastic container)

S

svtcontour

Hi,

I just got a pretty good price on plastic waste paper baskets that I calculated at approx 3 gallon in size. Would the amount of drain holes I drilled be fine or should it be more or less than this? Any suggestions welcome.

PS. is a 3 gallon container good enough for a single plant (say an orange hab) or should I really be moving it up to a 5 gallon or more down the road?

container.jpg
 
I think the number of holes will be fine. Not sure of the size from the pic, but I always use a 3/8" bit to drill the holes with. That will help keep them from getting clogged. Also, a 3 gal pot will be fine. That is the size that I used for most of my plants last year including Naga Morich, Datil, and Bhut Jolokia and they can get to be pretty big plants. You will still get a good harvest from it, but a 5 gal pot will produce a bigger plant on average and require less frequent waterings. I was having to water everyday in the heat of summer to keep them hydrated. I will be using mostly 5 gal this year to try and grow some monsters.:lol:

jacob
 
jjs7741 said:
I think the number of holes will be fine. Not sure of the size from the pic, but I always use a 3/8" bit to drill the holes with. That will help keep them from getting clogged. Also, a 3 gal pot will be fine. That is the size that I used for most of my plants last year including Naga Morich, Datil, and Bhut Jolokia and they can get to be pretty big plants. You will still get a good harvest from it, but a 5 gal pot will produce a bigger plant on average and require less frequent waterings. I was having to water everyday in the heat of summer to keep them hydrated. I will be using mostly 5 gal this year to try and grow some monsters.:lol:

jacob
Click to expand...

Great. I will move them in the pots then. I wasnt so sure about the sizes of the container and if 3 gallon would be good enough to produce a fruit bearing plant but now I know :) PS. The drill bit I used was 5/16" so hopefully thats good enough. Maybe for the future ones, I will use a larger bit. This was the first bucket I drilled.
 
It can definately be fruitful. My naga and datil both produced over 200 pods each while the bhut produced about 40 or 50. That's a lot of heat.

jacob
 
jjs7741 said:
It can definately be fruitful. My naga and datil both produced over 200 pods each while the bhut produced about 40 or 50. That's a lot of heat.

jacob
Click to expand...

Thats awesome. I ended up putting my Bhut Jolokia in a 5 gallon drilled bucket I had. The 3 gallon in the pic will be home to my other peppers. Reading your post and others, it seems as though Bhuts produce less fruit for the same size of plant so I figured I'd grow a larger Bhut to give more fruit :)
 
I got a piece of 3/8" rebar that I have used for big jobs (read lots of buckets)....heat it red hot and "it cuts like butter"
 
Most of us here in the UK don't generally go above 2.5 US gallon sized buckets. Maybe due to the weather or space requirements as you ideally need a greenhouse here.

Scotch bonnet from a few years ago
Image035-3.jpg
 
I am not going to comment on things being smaller in england... :rofl:

all kidding aside, with your shorter grow season, I can see why a 2.5 gal would work fine...pretty plant tole
 
Novacastrian said:
Use a blunt drill bit in brittle plastic, it will stop cracking.
Click to expand...

That is a very good tip. I cracked the bottom on 1/3 of the brittle plastic containers already :( It wont affect the abilty to hold soil but still, it was annoying to be hearing those cracking sounds and realizing that I was the one responsible. LOL.
 
You must log in or register to reply here.
Back
Top