I'm looking at an 8 lamp T5 Fluorescent Fixture by UltraGrow which I will be putting in 3000K as well as 6500K bulbs in the 5000 lumen range. So this should give me around 40,000 total lumens for the grow.
I have read that you need around 3,000 lumens per square foot of grow space? If this is not correct please let me know! But I have one hydroponic brown Moruga I will be growing as well as some other super hots in 5 gallon buckets. I also have 6 T12 fixtures that I have set up with 1900 lumen grow lights so a total of 12 1900 lumen grow lights ranging from 3000K to 6500K for the sides of the plants to get through the canopy.
About how many plants do you think I should be able to support on this system? Let me know!
Heres a link to the fixture I'll be using.
http://www.1000bulbs.com/product/88239/PX-UGT548.html
To explain my setup I have built a frame out of wood that will mount the main T5 fixture to which I can adjust the height. To the sides on the mount I am attaching the T12 fixtures 3 on each side. So the mount itself will be 5 ft high, 4 feet long, and 4 feet wide. The outsides will be covered in mylar to reflect light, and of course heated.
I will be using this rig for some cross pollination during the winter so all blooms will be bagged to stop unwanted crossing!
So if anyone could let me know if they think this will be enough light for at least 8-9 plants! If need be I can add higher lumen T12's to the mix as well
I have read that you need around 3,000 lumens per square foot of grow space? If this is not correct please let me know! But I have one hydroponic brown Moruga I will be growing as well as some other super hots in 5 gallon buckets. I also have 6 T12 fixtures that I have set up with 1900 lumen grow lights so a total of 12 1900 lumen grow lights ranging from 3000K to 6500K for the sides of the plants to get through the canopy.
About how many plants do you think I should be able to support on this system? Let me know!
Heres a link to the fixture I'll be using.
http://www.1000bulbs.com/product/88239/PX-UGT548.html
To explain my setup I have built a frame out of wood that will mount the main T5 fixture to which I can adjust the height. To the sides on the mount I am attaching the T12 fixtures 3 on each side. So the mount itself will be 5 ft high, 4 feet long, and 4 feet wide. The outsides will be covered in mylar to reflect light, and of course heated.
I will be using this rig for some cross pollination during the winter so all blooms will be bagged to stop unwanted crossing!
So if anyone could let me know if they think this will be enough light for at least 8-9 plants! If need be I can add higher lumen T12's to the mix as well