sirhc76 said:Questions, I think I have my answer but want to confirm it. I've got everything ready to start a few ferments, jars, airlocks, lactobacillus, and stuff to go inside the jars. I went to pick up some of the wide mouth reusable plastic lids since I have the tools to drill a hole for the 1/2 grommets but dont currently have a 1/2 hollow punch to cleanly punch a metal lid.
I noticed that the plastic lids dont have a gasket in them, is it a concern? I ask because I've read both yes and no on various forums and I've also seen assembled lids sold on various sites that include a gasket. Since I have the ability to drill glass would a better option be the glass clamp style jars/lids?
Last thing I promise. I had to run to the local homebrew store to get airlocks. The guy that helped me ferments and when I mentioned that I needed to get some ultimate flora for lactobacillus he directed me to a White Labs product, which I assume will work? Another member also pointed their 672 out to me so this seems like another option. http://www.whitelabs.com/yeast/wlp677-lactobacillus-delbrueckii-bacteria?s=homebrew
Thanks,
Thanks for the reply I went ahead and ordered these which should be here tomorrow. http://www.amazon.com/gp/product/B004PKGU28/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1SmokenFire said:
Plastic lids without a gasket are indeed a concern - there will be air passage into the vessel. See if you can't track down grommets to fit if at all possible. If you have a grommet that will fit a hole drilled into a glass clamp style lid that's fine too - but again the grommet is key Should be able to get them at the place you got the airlocks.
I've read that the white labs will work but never personally used it - some here swear by it. I'm usually an all natural just salt kinda guy but I've used whey in the past (all likely will again) with good results. You're well informed and have your stuff together, you'll be fine.
Halbrust said:Followed a link from another thread on this site and saw a cool fermenting vessel.
Thought I'd share.
Yes, you do a normal feeding of the starter.ForcesOfGood said:
1 Question after you make Sourdough Bread using some of the Sourdough Starter, Do you add anything to the Sourdough Starter you have left?
Chili Monsta said:If you choose to open and remove the yeast...add enough brine to cover and keep the mash submerged (at least 1-TBS salt per quart water), rinse the lid and reseal.You might get some more yeast growth, but the mash that remains below the surface of the brine will be fine.
You would need a flat surface to cover. And a weight.filmost said:
I might have to do this. I didn't use brine in mine, but just added salt directly. Do you use something to keep the peppers from floating up?
filmost said:
I might have to do this. I didn't use brine in mine, but just added salt directly. Do you use something to keep the peppers from floating up?
If you decide to remove the yeast growth, just pour in enough brine to cover the solids with about an inch of liquid. depending on how much salt you used initially, just mix up enough to replace what you have removed.filmost said:
I might have to do this. I didn't use brine in mine, but just added salt directly. Do you use something to keep the peppers from floating up?